SYMETRIX Jupiter 4 Digital Signal Processor DSP Used

Description

SYMETRIX Jupiter 4 Digital Signal Processor DSP
Comes with power supply, no other accessories. Fully working. 4 Analog Inputs and 4 Analog outputs. Only used for a short period of time in a cooled and maintained rack. One rack mount hole appears to have been drilled out slightly, but fully functional. Contact me if you have any questions. Ships USPS, FedEx or UPS at our discretion based on your location, WITH SIGNATURE CONFIRMATION, unless you specifically state otherwise.
Input
Inputs
4 switchable balanced mic or line level
Connectors
0.15" (3.81mm) terminal blocks
Nominal Input Level
Software Selectable: +4dBu mic level / -36dBu mic level (20dB headroom)
Gain
+40dB (mic preamp gain)
Trim
±24dB (input)
Maximum Input Level
+23dBu
Input Impedance
>18K Ohms (balanced)
>9K Ohms (unbalanced)
>2K Ohms (phantom power engaged)
CMRR
>50dB at 1kHz (unity gain)
EIN
Mic Preamp EIN:
Phantom Power
+20V DC (20mA max per input)
Output
Outputs
4 line level
Connectors
0.15" (3.81mm) terminal blocks
Nominal Output Level
+4dBu line level (20dB headroom)
Maximum Output Level
+24dBu
Output Impedance
200 Ohms (balanced)
100 Ohms (unbalanced)
System
Sample Rate
48kHz
Frequency Response
20Hz - 20kHz (±0.5dB)
Dynamic Range
>110dB A-weighted (input to output)
THD + Noise
Crosstalk
Interchannel Crosstalk:
Latency
General
Power Supply
AC 100 - 240V (50/60Hz)
Power Consumption
25W (max)
Dimensions (WxHxD)